English
فارسی
français
русский
italiano
español
português
العربية
Polski
Indonesia
românesc
diamond drill core bit for reinforced concrete
SANG diamond drill bit used for drilling reinforced concrete, asphalt, brick and air-cured refractories. Applied in Hilti ,Husqvarna drill machine.
These bits are specially formulated for hard aggregate and heavy steel. The serrated segments are 1/2" tall.
Use wet only. Sizes 2" to 14".
Sizes 2"-6" are laser welded.
Core Travel: 14".
Brand:
SANGItem No.:
SGCDPayment:
100% TT in advancePrice:
$50/pcsProduct origin:
QuanzhouColor:
BlackShipping port:
XiamenLead Time:
7 daysWet core drill bits with high diamond concentration and quality, for a faster coring and longer life. Perfect for drilling:
1.Concrete
2.Concrete with light steel reinforcement
3.Granite
4.Other hard masonry
Segment Height: 10 mm
Drilling Method: Wet only
Equipment: Hand held core drills or core drill rigs
For extended coring needs, check out our extended coring bits.
Contact: Cora Lai
Whatsapp/Wechat: 008618359826350
Email: sangvip@ sangtools.com
Customized specification is available.
SANG diamond drill bit used for drilling reinforced concrete, asphalt, brick and air-cured refractories. Applied in Hilti ,Husqvarna drill machine.
For drilling reinforced concrete, asphalt, brick and air-cured refractories. Universal wet drilling core bits are used for drilling machines.
For drilling reinforced concrete, asphalt, brick and air-cured refractories. Universal wet drilling core bits are used for drilling machines. Type of segment: flat segment, ∧ segment and ∨ segment, turbo segment. Type of thread: Straight shank; 5/8"-11; M14; UNC 1 1/4"-7; Gas 1/2; 3/4"-6.
For drilling reinforced concrete, asphalt, brick and air-cured refractories. Universal wet drilling core bits are used for drilling machines. Type of segment: flat segment, ∧ segment and ∨ segment, turbo segment. Type of thread: Straight shank; 5/8"-11; M14; UNC 1 1/4"-7; Gas 1/2; 3/4"-6.
For drilling reinforced concrete, asphalt, brick and air-cured refractories. Universal wet drilling core bits are used for drilling machines. Type of segment: flat segment, ∧ segment and ∨ segment, turbo segment. Type of thread: Straight shank; 5/8"-11; M14; UNC 1 1/4"-7; Gas 1/2; 3/4"-6.
For drilling reinforced concrete, asphalt, brick and air-cured refractories. Universal wet drilling core bits are used for drilling machines. Type of segment: flat segment, ∧ segment and ∨ segment, turbo segment. Type of thread: Straight shank; 5/8"-11; M14; UNC 1 1/4"-7; Gas 1/2; 3/4"-6.
24/7 via fax, email or phone.
