-
Select the saw blade according to the material you cut.
2019-11-18
SANG information about diamond saw blade The circular saw blade in the narrow water channel, with a substrate with a narrow water channel, with a diameter of 700mm-1800mm, is usually used for edge cut...
Read more
-
How to select the diamond saw blade
2019-11-25
1. Welding the diamond segment on the diamond saw blade matrix, consist of the diamond saw blade. Selecting diamond saw blade reasonably, can improve work efficiency, reducing Cost is of g...
Read more
-
how to reduce the diamond saw blade steel core warpage?
2020-04-21
The Core Warpage The possibility Solution The steel core has been overheated Supply sufficient water and make sure water pump is producing sufficient water. The blade is spinning on spindle Check spin...
Read more
-
Solve the diamond segment cracked and stone uneven cutting
2020-05-05
For the cutting material, the metal bond is too hard.We should use a blade with a softer bond matrix. The steel core is not flat.We should straightening and tensioning the steel core. More details abo...
Read more
-
Why the core drill bit can not drill?
2020-06-30
When the hardness of diamond bond is not suitable for the stone,that will smoothen the diamond.So the diamond core drill bit can not drill the hole and can not be sharp. We can solve the drill problem...
Read more
-
What causes diamond core drill bits to slip
2020-07-20
What causes diamond bits to slip when drilling into extremely hard formations? Many think that the reason is diamond powder can not open sharpness, the head of drill bit is too hard. Someone will try ...
Read more
-
how to judge concrete hardness
2020-08-31
Judge the concrete hardness Heavily reinforced concrete>reinforced concrete>concrete with hard aggregates>Normal concrete>Concrete with abrasive aggregates>green concrete>aspha...
Read more
-
How to judge the diamond segment quality?
2020-12-01
The segment quality can be judged by the following things: 1.the hardness.The hardness should be in proper range,depends on the material. 2.the size.the size deviation is the reflect of the quality.In...
Read more
-
How to select suitable diamond core drill bit
2020-12-21
How to select suitable diamond core drill bit? Please see the following advice: 1.according to the hardness of drilling material. 2.according to the abrasive. 3.pay attention to the diameter and worki...
Read more
-
how to use bush hammer make different stone surface
2021-07-22
Bush hammered’s grit can be changed through the adjustment of spring elasticity on bush hammer, or the press of the manual grinding machine. Both enlarging spring distance to reduce spring elasticity ...
Read more
-
Where is the stone industry of China
2021-10-15
1. Laizhou in Shandong province 2. Yunfu in Guangdong province 3. Shenzhen in Guangdong province 4. Cenxi in Guangxi province 5. Ya'an in Sichuan province 6. Nanyang in Henan province 7. Xinjiang prov...
Read more
-
How to do concrete demolition and destruction
2021-12-27
1. Laser diamond Saw blade cutting: installing saw blades of different specifications can cut and dismantling different thicknesses concrete. 2.Concrete diamond wire saw cutting: cutting equipment wit...
Read more
English
فارسی
français
русский
italiano
español
português
العربية
Polski
Indonesia
românesc
中文