Blog
Home /

Blog

/Why some diamond segment can't cut the stone.

Why some diamond segment can't cut the stone.

2022-10-25
Diamond segment is a widely used material in stone mines and widespread use in stone processing; some manufacturers will encounter the use of diamond segment. There are not enough strength to cause the following five reasons:

1. The problem of diamond powder.
Diamond powder is not enough or chosen to be poor in quality;

2. Mix into impurities.
Mixing impurities in the inside of the knife head and mixing in the material, such as graphite particles, dust, etc., especially during the mixing process, uneven mixing can also cause this situation;

3. Diamond overcarbonization.
Diamond is excessively carbonized and the temperature is too high, resulting in serious diamond carbonization. During the process of cutting stone, diamond particles can easily fall off;

4. The formula or technology of diamond tool is not reasonable.

The unreasonable design of the Diamond segment or the process is unreasonable, or the sintering process is unreasonable, resulting in the low strength of the working layer and transition layer (or the combination of the working layer and the non -working layer is not close). Generally, this situation is generally the case. It often appears on the new formula;


5.the head of the bond is too soft or too hard.

The Diamond segment binding agent is too soft or too hard or too strong, resulting in the inadequate proportion of diamond consumption and metal binding agent, which causes quality problems.


Sang Diamond Tools Company, which is professional in this market since 1993.We specialize in producing many kinds of diamond segment.High effective, environmental friendly, easy operation, long lifespan and no edge broken.

If you want to know more about our product, please contact us.
Quanzhou Sang Diamond Tools Co., Ltd.
[email protected]


Send A Message

24/7 via fax, email or phone.

Leave a message Request a free quote
24/7 via fax, email or phone.