Marble is one of the indispensable materials in decoration. The texture of marble is hard and brittle. If it is difficult to cut with ordinary tools, diamond saw blades can perfectly solve the cutting problem. Because of its high hardness, diamond cutting discs are especially suitable for cutting materials with high hardness, so it is most suitable to use diamond cutting discs to cut marble.
The cutting edge of the diamond cutting blade is coated with a layer of metal when it leaves the factory. Before use, this layer of metal needs to be scraped off to expose the diamond particles inside before it can be used normally.
Precautions when using diamond cutting discs:
First, it is necessary to check whether the accessories are complete before cutting, and drop the lubricating oil on the machine. The operator cannot directly operate it, and must wear a protective cover to improve the production safety factor.
Second, when cutting, the marble needs to be placed flat, and it is best to be parallel to the ground, so as to ensure that the cutting will not be skewed, resulting in waste of stone. Before cutting, draw a horizontal line at the cutting position to reduce cutting errors.
Third, if the equipment has abnormal noise or shakes during cutting, be sure to stop operating the machine immediately, and then power off for maintenance.
Fourth, when cutting marble, the speed should not be too fast, otherwise the marble will be damaged, and cutting too fast will generate excessive heat due to friction and wear the cutting blade. If the cutting blade is deformed, it can no longer be used and needs to be replaced with a new cutting blade.
Fifth, after the cutting operation is completed, the parts should be stacked in order, the debris generated during the work should be cleaned up, and the machine should be coated with protective oil.
For more details about diamond saw blade or polishing tool,contact us
WWW.SANGTOOLS.COM
[email protected]
English
فارسی
français
русский
italiano
español
português
العربية
Polski
Indonesia
românesc
