-
Why is my concrete floor grinder not sharp?
2021-09-15
Usually the grinding temperature is too high will cause the sharpness decrease. Solution: ---add some water; ---reduce the RPM.for example, 700 change to 650; ---reduce the weight of the machine; ---I...
Read more
-
How to use and maintenance for bush hammer
2021-07-22
1.RPM of Manual grinding machine:RPM700~800 2.Use as mush water as possible to cool the grinding machine. 3.Pay attention to the pressure of the grinding machine on the bush hammer. Make sure that it ...
Read more
-
how to use bush hammer make different stone surface
2021-07-22
Bush hammered’s grit can be changed through the adjustment of spring elasticity on bush hammer, or the press of the manual grinding machine. Both enlarging spring distance to reduce spring elasticity ...
Read more
-
The precaution of diamond wire saw
2021-07-09
1. Direction: The arrow direction on the wire saw is the wire saw forward direction 2. Connection: use the equipped we provided to connect the joint. 3. Twist: Twist at 2 turns/m before joint to preve...
Read more
-
The Safety Precautions of diamond wire saw
2021-07-06
Thank you for choosing SANG’s wire saw. For safty , Please follow below regulations while the wire saw working 1. When entering the wire saw work area, please wear safety helmet. 2...
Read more
-
How to choose a concrete saw blade?
2021-07-02
How to choose a concrete saw blade? 1.The cutting material.Green concrete, cured concrete, reinforced concrete or others. 2.The machine model.applied in Husqvarna,Hilti,Tyrolit machine,etc... 3.The po...
Read more
-
Why concrete saw blade can not cut granite?
2021-06-26
One client from Euro complain the concrete saw blade used for cutting granite and running very slowly. Yes, it should be , because the concrete is one kind of abrasive material, ...
Read more
-
how to judge the diamond saw blade efficiency
2021-01-13
To judge the cutting effect of diamond saw blade, there are mainly three indexes: cutting efficiency, lifespan and processing Cutting efficiency is an indicator of productivity, usually cm2/min,m2/h, ...
Read more
-
Husqvarna redi lock diamond grinding
2020-12-26
For Husqvarna machine, there are many types metal bond diamond tools, the typical things is redi lock. 1.Single segment or double segment: single segment--- used in lighter machine ,increase the press...
Read more
-
How to select suitable diamond core drill bit
2020-12-21
How to select suitable diamond core drill bit? Please see the following advice: 1.according to the hardness of drilling material. 2.according to the abrasive. 3.pay attention to the diameter and worki...
Read more
English
فارسی
français
русский
italiano
español
português
العربية
Polski
Indonesia
românesc
中文