| Problem | Cause | Solution |
| Diamond powder falling | Using a wet cutting blade for dry cutting | Use a dry blade instead |
|
Diamond powder falling |
Insufficient supply of water to the blade | Make sure water hoses are clean and free from any blockages.Supply sufficient water flow to both sides of the blade. |
| Diamond powder falling | The blade vibrates during cutting | Attach the blade to flange firmly and make sure machine condition is properly controlled. |
| Diamond powder falling | The bond natrix is too soft to hold diamonds | Choose a harder bond matrix. |
| Diamond powder falling | Using a wrong arbor hole | Check proper size of bore. |
| Diamond powder falling | Excessive work time | Reduce and control work time. |
| Diamond powder falling | The material being cut or the machine is not held firmly | Maintain a firm grip on the material and secure the machine firmly |
www.sangtools.com 0086-5959-2269955 [email protected]
24/7 via fax, email or phone.
English
فارسی
français
русский
italiano
español
português
العربية
Polski
Indonesia
românesc