| Problem | Cause | Solution |
| Blade won't cut | The bond matrix is too hard for the cutting material | Use a soft bond blade |
|
Blade won't cut |
The cutting material is too hard for the blade | Use the blade cut some soft material to Expose diamonds.If it still doesn't work,it seems that the bond is too hard, change soft bond saw blade. |
|
Blade won't cut |
Insufficient power to permit the blade to cut properily. | Use correct voltage and enough horse-power. |
More details please contact us.
WWW.SANGTOOLS.COM
0086-595-22699555
24/7 via fax, email or phone.
English
فارسی
français
русский
italiano
español
português
العربية
Polski
Indonesia
românesc