-
What are the factors that affect the cutting of diamond saw blade
2020-07-18
First:the cutting data. 1.the cutting speed;2.cutting depth;3.the feeding speed. Second:the other factors.1.the diamond 2.the powder.3.the hardness of bond;4.the cutting temperature;5.the cutting cons...
Read more
-
What material is used in diamond saw blade for stone concrete
2020-07-18
The matrix matrial are 50Mn,50Mn2V,65Mn,T12,T10,etc. The Powder are Cu,Ni,Mn,Co,Wu,Sn,Zn,Fe,Ti,Cr,Pb,Al,some rare earth metals. We,SANG,have strict formula systems to make the diamond saw blade suitab...
Read more
-
Why the core drill bit can not drill?
2020-06-30
When the hardness of diamond bond is not suitable for the stone,that will smoothen the diamond.So the diamond core drill bit can not drill the hole and can not be sharp. We can solve the drill problem...
Read more
-
How to classify diamond abrasives ?
2020-06-01
How to classify diamond abrasives ? According to the diamond bond difference, it can be divided into metal bond diamond abrasives, resin bond diamond abrasives, ceramic bond diamond abrasives an...
Read more
-
how to solve the diamond saw blade arbor out of round
2020-05-19
Reason Solution The flange is not tightened properly,causing the blade rotate or vibrate on the spindle Wrench-tighten spindle nut to make certain the blade is adequately secured to prevent it from ro...
Read more
-
How to reduce stone cutting machine blade noise problem?
2020-05-11
How to reduce stone cutting machine saw blade noise problem? Reason Solution Water supply is not enough Make sure water hoses are clean and free from any blockages.Supply sufficient water flow to both...
Read more
-
Solve the diamond segment cracked and stone uneven cutting
2020-05-05
For the cutting material, the metal bond is too hard.We should use a blade with a softer bond matrix. The steel core is not flat.We should straightening and tensioning the steel core. More details abo...
Read more
-
How to solve uneven diamond segment wear problem?
2020-04-28
Reason Solution Insufficient supply of water to the blade Make sure water hoses are clean and free from any blockages.Supply sufficient water flow to both sides of the blade Defective machine which ca...
Read more
-
how to reduce the diamond saw blade steel core warpage?
2020-04-21
The Core Warpage The possibility Solution The steel core has been overheated Supply sufficient water and make sure water pump is producing sufficient water. The blade is spinning on spindle Check spin...
Read more