Case

Construction Requirements for Cutting Safety of Concrete Saw Blades

2022-04-06
Concrete saw blade cutting is to use water-cooled diamond track or wire saw cutting machine to open and dismantle concrete. It has fast construction speed, low noise, no vibration, good quality and no impact on building structure. It is a replacement for electric hammers, air picks, Manual brazing and other construction techniques with large vibration machines.

Safety Construction Requirements


1. Before starting, check whether the motor and cables are normal, whether the protective grounding, protective devices, and saw blades meet the requirements and whether the installation is correct.

2. After starting, first run with no load, check the running direction of the saw blade, whether the lifting is flexible, whether the operation is abnormal, and everything is normal before operation.
3. The cutting thickness should not exceed the factory regulations.

4. Prevent the saw blade, wire saw, etc. from sticking.

5. When there is abnormal sound during the concrete cutting operation, it should be stopped immediately for inspection, and the operation can be continued after the fault is eliminated.

6. The size of the concrete block to be cut should be strictly calculated.

7. After the operation, the machine body should be cleaned, the saw blade and wire saw should be wiped dry, the residual water in the box should be drained, the cables should be recovered, and stored in a dry and ventilated place.


For more details about diamond saw blade or polishing tool,contact us

WWW.SANGTOOLS.COM

INFO@SANGTOOLS.COM

Send A Message

24/7 via fax, email or phone.

Leave a message Request a free quote
24/7 via fax, email or phone.