Case

How to cutiing reinforced concrete

2022-10-31
First, construction preparation:
(1) Ensure that the construction site is water and power.
During the cutting process, cold water has the effect of cooling the cutting equipment itself and avoiding dust. (2) Organize drainage in an orderly manner around the cutting area to prevent construction of the surrounding environment of water pollution.

Second, the segmentation of the block:
(1) According to the survey of the construction drawings and on -site entities, technicians need to design and typeset the concrete entities to be removed to remove the entity and block.
(2) The lifting capacity of the lifting equipment must be considered during the typesetting process. Calculate the weight of the cutting block before the typesetting, meet the load requirements of the lifting equipment, and perform a reasonable typesetting block.
(3) The cutting row map is distributed to the preparatory staff and the construction personnel. The accurate cutting line is required to pop up with the ink line and protect it.

Third, applicable cutting equipment:
(1) Select a reasonable position according to the cutting line and install the cutting equipment.
(2) The method of drilling on the concrete entity is used to tighten the device base with expansion bolts.

Fourth, concrete cutting:

For the original reinforced concrete structure, use the diamond saw blade to cuuting the concrete, and the original concrete is removed. For the original complex concrete structure, use diamond wire saw and diamond drilling bits to combination operation.



For more details about diamond saw blade or polishing tool,contact us

WWW.SANGTOOLS.COM

[email protected]


Send A Message

24/7 via fax, email or phone.

Leave a message Request a free quote
24/7 via fax, email or phone.