Case

How to replace the saw blade of a concrete cutter?

2022-03-23

1. If the saw blade of the cutting machine needs to be replaced during the cutting of reinforced concrete, see clearly a saw blade rotation direction mark marked on the cutting saw itself. The thread of the compression nut fixing the saw blade is opposite to the rotation of the saw blade, so that the saw blade rotates When the blade rotates, the bolts tend to be tightened with the rotation. When replacing the saw blade, first fix the saw blade with a wrench, and then follow the cutting direction according to the direction indicated by the arrow itself, and turn the upper nut to remove the saw blade.


2. When removing parts, mark and record the parts in the order of removal.


saw blade

3. Put on a new concrete saw blade.


4. After replacing the saw blade, the engineer of the reinforced concrete cutting engineering team reminded the operator to remember to reset the parts in the reverse order and mark of the removed parts.


5. Tighten the fixing nut.


6. Test run to check whether the saw blade rotates smoothly. That is, the work of changing the saw blade is completed.




Quanzhou SANG Tools Co., Ltd. The company specializes in selling all kinds of diamond saw blades, diamond wire saw,diamond grinding pads/cup wheel,polishing pads,drill bit, and other diamond tools. Not only the service attitude is good, the product quality is high, the after-sales service is guaranteed, and it is a profession accumulated with 29 years of experience.


For more details about diamond saw blade or polishing tool,contact us

WWW.SANGTOOLS.COM

[email protected]



Send A Message

24/7 via fax, email or phone.

Leave a message Request a free quote
24/7 via fax, email or phone.